Fax Active Screen - Konica Minolta BIZHUB C250 Operations

Utility mode
11.4

Fax active screen

Set the message in transmission if it is displayed on the screen or not.
Item
TX Display
RX Display
*
indicates factory default setting.
1
Open the User Setting screen (See "Entering user setting" on
page 11-3).
2
Press [Display Setting].
– Some items may not be displayed depending on the optional
settings.
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Display
Setting], enter 2 through the numeric keypad.
bizhub C250 (Phase3)
Description
Set the message in [Transmission] if it is dis-
played on the screen or not.
Set the message in [Receive] if it is displayed
on the screen or not.
11
Available value
*
ON / OFF
*
ON / OFF
11-19