Konica Minolta BIZHUB C250 Operations page 119

Transmission
4
Designate the time to start communication from the keypad.
– "Hour" and "minute" of the time to start communication are
displayed in the 24-hour style, and entered in two digits.
– For example: To set the time to start communication at 9:07 p.m.,
input "21" and "07."
– To release the setting, press [OFF].
5
Press [OK].
You return to the Comm. Setting screen.
6
Press [OK].
You return to the fax screen.
7
Set other functions if necessary.
– See "Setting transmission conditions" on page 3-12 for information
about setting functions in the fax screen. See "Opening the scan
setting screen and comm. setting screen" on page 7-3 for
information about setting functions in the fax Application screen.
8
Designate the destination(s).
– For details, see "Selecting one destination" on page 3-22.
9
Set the original document.
– For details, see "Placing originals on the platen glass" on page 3-8.
10
Press [Start].
The FK-502 reads the document and holds it in memory until the
specified time when transmission starts.
bizhub C250 (Phase3)
3
3-51