Header Setting - Konica Minolta BIZHUB C250 Operations

Transmission applications
7.9

Header setting

Whether to attach the Header Information to each job can be specified at the
time of fax transmission.
Register the contents to add to the original as [Header Information] as the
Header in the Utility Mode.
Set the method to attach the Header Information in the [Header/Footer
Position] in the Utility Mode.
!
Detail
[Header Setting] cannot be selected depending on the country.
Refer to p. 11-31 and p. 11-34 for more information about Header
Information and Header/Footer Position.
1
Press [Fax ]on the control panel to view the Fax screen.
2
Press [Scan Setting].
3
Press [Header Setting].
bizhub C250 (Phase3)
7
7-25