Konica Minolta BIZHUB C250 Operations page 164

7
Function
Mixed Original:
Bind Position:
Frame Erase:
Background Adjustment:
Sharpness:
Number of Originals:
Scan Size:
Header Setting
File Type:
Quick Memory TX:
Password TX
Polling TX:
Polling RX:
Timer TX:
F-Code TX
7-6
Description
You can send document pages of mixed sizes in a single se-
quence of operations. (page 7-8)
Function to specify the stapling position of the original when
reading a double side original in the ADF and correct vertically
the rear face of the original. (page 7-10)
When transmitting pages in a book, this function allows you to
erase dark bands that would otherwise be reproduced in the
marginal areas of the transmitted pages. (page 7-13)
Function to send a message after adjusting the density in the
background color of the original. ("Background adjustment" on
page 7-16)
Function to send a message after making the edge of character
sharpened. (page 7-19)
In Quick Memory Transmission, the total number of pages
transmitted can be included in the page number information.
(page 3-47)
This function allows you to designate the size of the document
to be transmitted. It is convenient when you intend to transmit
part of a page or pages. (page 7-22)
*1
: When transmitting jobs by fax, specify a method to attach the
Header Information for each job. (page 7-25)
[Header Setting] cannot selected depending on the country.
Specify the format of an attached file when sending a message
by E-Mail. (page 7-28)
Function to send a message each time a page of document is
read. (page 3-45)
*2
: Transmission can be sent with a password attached, as re-
quired when the receiving station is using a closed area com-
munication mode. (page 7-31)
This function allows you to read a document and store it in
memory until the destination initiates transmission by sending
a command to receive (polling). (page 9-3)
This function allows you to initiate reception by sending a com-
mand to a destination to receive a document that is set for
transmission at the destination. (page 9-7)
The time to start communication can be specified. (page 3-50)
*3
: This is a function in which the SUB Address and the password
are specified to use the Confidential Communication and the
Relay Request. (page 7-34, page 7-37)
Transmission applications
bizhub C250 (Phase3)