Set The Multi Lines Setting; Telephone Line Setting - Konica Minolta BIZHUB C250 Operations

11

11.16 Set the multi lines setting

Set the items for the additional line.
Note
Multi Lines Setting can be set only when the Fax Multi Line is installed.

Telephone line setting

Set the parameter for the additional line.
Item
Telephone Line Set-
ting
*
indicates factory default setting.
1
Open the Administrator Setting screen (See "Entering administrator
setting" on page 11-4).
2
Press [Fax Setting].
– Some items may not be displayed depending on the optional
settings.
11-74
Description
Dialing Method Set the dialing method for
the Line 2 (additional line).
Number of RX Call Set the arrival frequency for
Rings the Line 2 (additional line).
Set the pseudo ring back
tone frequency after the ar-
rival until receiving is start-
ed.
Line Monitor Sound To hear the sound on the
line from the speaker at the
time of transmission with
the Line 2 (additional line),
set it to ON.
Utility mode
Available value
*
PB / 10pps
*
0-15 (2 times )
*
ON / OFF
bizhub C250 (Phase3)