For Europe - Konica Minolta BIZHUB C250 Operations

Introduction
The automatic calling functions of this equipment must not be used to cause
a nuisance to other customers.
Telepermitted equipment only may be connected to the auxiliary telephone
port. The auxiliary port is not specifically designed for 3-wire connected
equipment. 3-wire might not respond to incoming ringing when connected to
this port.

For Europe

The Facsimile has been approved in accordance with Council Decision
1999/5/ EC for pan-European single terminal connection to the public
switched telephone network (PSTN). However, due to differences between
the individual PSTNs provided in different countries, the approval does not,
of itself, give an unconditional assurance of successful operation on every
PSTN network terminal point.
In the event of problems, you should contact your equipment supplier in the
first instance.
The CE marking must be affixed to the
product or to its data plate. Additionally it
must be affixed to the packaging, if any, and
to the accompanying documents.
bizhub C250 (Phase3)
1
1-7