Konica Minolta BIZHUB C250 Operations page 244

10
– [Delete] : Characters on the position of the cursor are deleted one
by one.
When the cursor is at the right end, the character are deleted from
the rear end.
– [Out side] :When the [PBX ON Set] is ON, [Out side] can be
specified. By selecting it, [E-] is displayed.
Refer to p. 11-68 for more information about PBX CN Set.
– Up to 38 digits can be entered.
– When an erroneous input is made, correct it by pressing [Delete] to
delete characters one at a time, or pressing [C] (clear) to delete all.
– When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as "0" so that dialing is made more surely. "P" is
displayed on the screen.
7
To change the Search Character, press [Index] and then re-register the
Search Character.
– Press the Search key of the Search Character you want to register
from among [Main] - [etc].
– For a destination to which a message is sent frequently, specify the
Search Character and select [Main] at the same time. This allows
you to display it at the first place in the selection of the Address
Book.
– A character at the head of the Name is automatically set as the
Search Character.
8
To set a line, press [Line Setting], set the function and press the [OK]
button.
– Refer to "Specifying the line for sending (Line selection)" on
page 7-51 for more information on the Line Selection.
9
Press [OK].
– To stop registering, press [Cancel].
Registration is performed and the registered destination is displayed
on a list.
10
Press [Close].
When proceeding with the registration of the Address Book, go to Step
4.
11
Press [Exit] on the sub-area.
10-8
Registering/Settings
bizhub C250 (Phase3)