Program - Konica Minolta BIZHUB C250 Operations

Transmission

Program

When a destination has been registered for program, it can be dialed by
pressing Program.
1
Press [Program] in the fax screen.
2
Select the programmed destination you want to use.
– The setting for the registered function is activated.
– Press
screen.
The destination that has been specified is displayed in the Broadcast
Destinations.
3
Press [Start].
Transmission begins.
Note
When the Comm. Setting function is set in the Program, the function is
automatically set.
Two or more Programs cannot be specified.
When the destination is an E-Mail address, the Subject, the Text, the File
Name, and the From of the sender can be set manually. For details, refer
to "Confirming settings and communication results" on page 3-17.
bizhub C250 (Phase3)
or when desiring to display the next or previous
3
3-23