Installation Precautions; Installation Site; Power Source - Konica Minolta 8031 Instruction Manual

3
3.1

Installation Precautions

Installation Site

To ensure utmost safety and prevent possible malfunctions, install the copier in a
location that meets the following requirements.
-
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and not
exposed to extremely high or low temperatures
-
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust from the
copier
-
A location that is not near any kind of heating devices

Power Source

The power source requirements are as follows.
G Voltage fluctuation: Maximum ±10%
(AC 127 V areas only: Between –10% and +6%)
G
Frequency fluctuation: Maximum ±0.3%
❍ Use a power source with as little voltage or frequency fluctuations as possible.
3-2
3.1 Installation Precautions
Konica 8020/8031