Stand Detection; Auto Trigger Settings; Enable When Scanner Inserted In Stand; Figure 34: Auto Trigger Configuration Diagram - Opticon OPR 3201 Specification Manual

16.2. Stand Detection

Enabled: This option automatically enables auto trigger when the reader is inserted into a
stand.
Disabled: The reader auto trigger function behaves the same whether it is in or out of the
stand.
Descriptions in parentheses show menu IDs.

Figure 34: Auto trigger configuration diagram

16.3. Auto Trigger Settings

Enable when Scanner Inserted in Stand

16.3.1.
Enable auto trigger only when the scanner is inserted into the stand.
SET
Enable auto trigger
Enable auto trigger stand detection
END
(If the scanner is removed from the stand, auto trigger is disabled and the scanner
should be triggered manually.)
Functions Menu labels
_ZZ_
_+I_
_*4_
_ZZ_
41
Specifications Manual
Menu codes
ZZ
+I
*4
ZZ
Opticon
OPR 3201