Auto trigger can be enabled in 2 ways:
•
Stand detection mode: This option enables auto trigger automatically in case the
scanner is inserted into the stand.
•
Normal auto trigger mode.
*Descriptions in ( ) show menu IDs.
15.1. Auto Trigger Settings
Stand Only
15.1.1.
Enable auto trigger only when the scanner is inserted into the stand.
SET
Enable auto trigger
Enable auto trigger stand detection
END
(If the scanner is removed from the stand, auto trigger is disabled and the scanner
should be triggered manually.)
Figure 29: Trigger options
Functions
38
Menu labels
Menu codes
_ZZ_
ZZ
_+I_
+I
_*4_
*4
_ZZ_
ZZ
Opticon
OPR 2001
Specifications Manual