Minolta Di151 Manual page 76

5
3 When the desired User's Choice
code appears on the Display Panel,
press the [START] key.
This then displays the currently set
number for the User's Choice code.
If necessary, use the [10] and [1]
4
keys to select the code number of
the User's Choice code.
? How to specify code numbers
using a prefixed minus sign (-):
➜ Press the [10] and [1] keys
repeatedly until the desired
code number is displayed.
5 Press the [START] key.
The new configuration is stored.
? How to cancel the changes
without saving them:
➜ Press the [STOP] key to leave
the User's Choice code without
saving the changes.
6 Press the [STOP] key to return to
the standard display.
Or
If desired, repeat steps 2 to 5 to
configure other User's Choice
Settings.
5-2
User's Choice Settings
C/
Di151