2
house technical support if required.
G
Voltage ± 10%
G
Frequency ± 0.3%.
2.6
Switching the Copier On and Off
Switching the Copier On
➜
Press the Power Switch to the ON
position.
After about 30 seconds, the
[START] button turns green. The
number of copies is indicated as 1
on the display. The copier is now
ready for operation.
Default settings:
G
Number of copies:
G
Paper source:
G
Zoom Ratio:
G
Exposure:
G
Output mode:
The default settings can be changed in the User's Choice Settings, see
page 5-1 and the following pages.
2-18
Getting to Know Your Copier
1
Default Drawer
100%
Auto Exposure
Non-Sort.
ON
OFF
Di151