Minolta Di151 Manual page 57

Initial Steps . . .
3 Shake the new development unit a
few times (see illustration) to loosen
any clumps of toner.
4 Hold the development unit by its
handle. Place it into the guides
marked green.
Carefully let the development unit
5
slide into the guides.
In doing so, the development unit
rotates back.
6 When the development unit stops
rotating, press the unit carefully
until you hear it latch in place.
Close the Copier Cabinet.
7
Protecting the Environment . . .
Dispose of the used development unit in an environmentally friendly
manner. For more information, see page 1-2.
Di151
3
3-19