Minolta Di151 Manual page 19

Getting to Know Your Copier
DANGER
Incorrect handling of the power cable can result in fire and/or
electrical shock!
The copier is equipped with high-voltage components. Incorrect handling
of the copier's power cable may cause damage to the cable. This could
result in fire and/or cause electrical shock. Observe the following safety
precautions to prevent injury and device damage.
➜ Be sure that the power cable is not damaged. If this is not the case,
switch off the copier immediately and then unplug the power cord.
Consult your Technical Representative.
➜ Do not pull directly on the power cable itself when unplugging the
power cord from the power outlet.
➜ Do not move the copier unless it is unplugged.
➜ Never place heavy objects on the power cable.
➜ Do not pull or bend the power cable.
➜ Do not place the copier on cables belonging to other devices.
➜
Ensure that no cables of other devices get pinched in the copier.
➜ Be sure that the power cord sits correctly in the power outlet.
➜ Always make sure that the power outlet is visible and accessible at all
times.
➜
If an extension cable is needed, use one with a capacity that
corresponds to or exceeds the power consumption of the copier.
➜ Never connect the copier to a multiple-socket extension cord.
Di151
2
2-7