Vq Flying Bracket (Single Point Hang Flying Bracket) - Tannoy VQ 60 User Manual

7.2 VQ FLYING BRACKET (SINGLE POINT HANG FLYING BRACKET)

For safe, flexible and simple flying, the VQ Flying bracket is designed to suspend the VQ cabinet from a single
pivot point. This allows precise adjustment of aiming angles with the cabinet in situ. The flown VQ loudspeaker
must be provided with an independent, correctly rated and securely attached secondary safety – in addition to the
principle hardware device. This secondary safety must prevent the loudspeaker from dropping more than 150mm
(6") should the principle hardware device fail.
Note: All fixings should be thread-locked and torqued to 25Nm.
The rod end is used in conjunction with the VQ flying bracket. Two types of rod end are available. One is designed to
accept ½" UNC threaded rod, and the other accepts 12mm threaded rod. (Threaded rod supplied by user).
18
Item No. Description
1 M10 Plain Washer
M10 Spring Washer
2
Screw M10 x 50mm
3
Bracket Flying - VQ
4
Item No. Description
1 Rod End – VQ _" UNC or 12mm
2 Screw M12x45 Cap Head
3 M12 Nyloc Nut
Quantity
3
3
3
1
Quantity
3
3
3