Assembly Of Wall Bracket; Fix Bracket To Wall Surface - Tannoy QFLEX 64 Mounting And Installation Manual

1. Assembly of wall bracket

Join the three sections of the wall bracket using the hardware provided.
Mounting Block Detail
Bottom section

2. Fix bracket to wall surface

Whenever a Tannoy Professional loudspeaker is fixed to a surface using a Tannoy Professional Hardware
device, the installer must ensure that the surface is capable of safely and securely supporting the
load. The hardware employed must be safely, and securely attached both to the loudspeaker and also
to the surface in question, using only the fixing holes provided as standard and in accordance with
the instructions in this document. Secure fixings to the building structure are vital. Seek help from
architects, structural engineers or other specialists if in any doubt.
1. Assembly of wall bracket
Top section
Middle section
Description
Washer M6 normal A2 S/S
Screw M6 x 50 CAP HD SKT A2 S/S
Nut M6 NYLOC Stainless Steel
QFLEX 64 Mounting and Installation Guide rev 1.1.0
QTY.
4
2
2
3