Flying Using Eyebolts; Flying Using Screwed Rod - Tannoy CMS 1201DC Operation Manual

Professional loudspeakers

Hide thumbs Also See for CMS 1201DC:

Table of Contents

4. Installation Guide

4.3. Flying using Eyebolts

WARNING: As the legal requirements for flying change from country to country, please consult your local safety

standards office before installing any product. We also recommend that you thoroughly check any laws and

bylaws prior to commencing work.

The device can also be hung via 4 top-mounted eye bolts. Rear of back can has mounting points for both M10

and 3/8 UNC threaded eyebolts.

The design also caters for a single point central hang via M10 or 3/8 UNC screwed rod – made easy thanks to

the slotted mounting saddle on the top of the back-can. If required a safety wire can be attached to any of the

M10 flying points.

To fit the back can to threaded rod support, first run a nut 50 mm (2") up the rod followed by two plain washers

and then a locking nut (Nyloc®). Hook the back can on to the rod between the two plain washers. Once the nut

has cleared the guide slot the top nut can be locked down to secure.

CMS 3.0 Series Operation Manual rev 3.0.0

Table of Contents