Loudspeaker Management Systems - Tannoy VQ 60 User Manual

6 LOUDSPEAKER MANAGEMENT SYSTEMS

Tannoy VQ series loudspeakers are designed to be used with an electronic signal processor which provides
crossover, equalization, delay and dynamic functions. We strongly recommend the use of the Tannoy Vnet SC1
controller, as the VQ range of loudspeakers were voiced with this unit. Also, small discrepancies can be evident
between various manufactures filter coefficients.
In its basic configuration the Tannoy VNET SC1 is a powerful 2 in 6 out digital system controller provides multiple
X-Over, EQ, Delay and Limiting options. Using DSP-based digital crossovers with 96kHz sampling rates, this
versatile controller will enable simple configuration and optimization of loudspeakers in terms of speaker
management and room EQ functionality.
Two versions of the VNET SC1 are available – one with a VNET™ network card and one without.
The network enabled version facilitates VNET™ networking capability with two network ports provided for
connection to any Tannoy VNET™ system. See www.tannoy.com for more a more detailed specification on the
VNET SC1.
However, you may still wish to use an alternative loudspeaker management system. The necessary system
parameters which must be adhered to for optimum system performance are shown in the tables in the
following pages.
8