Tannoy VQ 60 User Manual page 28

11.3 VQ DF TECHNICAL SPECIFICATIONS
System
System Type
Frequency Response (-3dB)
Frequency Range (-10dB)
Operating Modes
System Sensitivity (1W @1m)
Single Amplified
Passive MF/HF (450Hz - 23kHz)
Bi-Amp
MF (450Hz - 7kHz)
HF (7kHz - 23kHz)
Dispersion H x V (-6dB)
Driver Complement
MF/HF
Crossover Frequency
Directivity Factor (Q)
Directivity Index (DI)
Rated Maximum SPL
Mid Frequency
High Frequency
Passive MF/HF
(3)
Power Handling
MF @ 8 Ohms
HF @ 8 Ohms
Passive MF/HF @ 8 Ohms
28
2-Way Mid/High -
Point Source
(1)
400Hz - 23kHz
(1) 350Hz - 27kHz
Single Amplified
Bi-Amp (MF,HF) -
User Configurable
(2)
110dB (2.83V @ 8 Ohms)
110dB (2.83V @ 8 Ohms)
110dB (2.83V @ 8 Ohms)
80 x 50 degrees
Dual Concentric™ Compression
driver loaded into a single
PSW™ Waveguide
Single Amplified - 7kHz (passive)
Bi-amp 7kHz (active)
Recommended HighPass
Filter @ 450Hz
13.4 averaged 1kHz to 10kHz
11.3 averaged 1kHz to 10kHz
(2)
134dB (average) 140dB (peak)
133dB (average) 139dB (peak)
134dB (average) 140dB (peak)
Average Peak
200W (40V) 400W
90W (27V) 180W
200W (40V) 400W
Recommended Amplifier Power
Mid Frequency
High Frequency
Passive MF/HF
Nominal Impedance
Mid Frequency
High Frequency
Construction
Enclosure
Grille
grille
Finish
Connectors
Fittings
Dimensions
NET Weight
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred
to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber,
then referred to 1 metre
(3) Accelerated Life Test (EIA RS426-B)\
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
400W into 8 Ohms
200W into 8 Ohms
400W into 8 Ohms
8 Ohms (6.5 Ohms Minimum)
8 Ohms (8.5 Ohms Minimum)
18mm (0.71") birch plywood.
Powder coated perforated steel
Black or white textured paint
(custom colours on request)
Barrier Strip
2 x Recessed carrying handles
9 x M10 flying inserts
460mm x 694mm x 497mm
(18.11" x 27.32" x 19.57")
28kg (61.7 lbs)