Tannoy VQ 60 User Manual page 26

11.1 VQ 60 TECHNICAL SPECIFICATIONS
System
Frequency Response (-3dB)
Frequency Range (-10dB)
System Sensitivity (1W @1m)
Bi-Amp
LF (80Hz - 450Hz)
Passive MF/HF (450Hz - 23kHz)
Tri-Amp
LF (80Hz - 450Hz)
MF (450Hz - 7kHz)
HF (7kHz - 23kHz)
Dispersion (-6dB)
Driver Complement
LF
MF/HF
Crossover
Directivity Factor (Q)
Directivity Index (DI)
Rated Maximum SPL
Low Frequency
Mid Frequency
High Frequency
Passive MF/HF
Power Handling (3)
LF @ 4 Ohms
MF @ 8 Ohms
HF @ 8 Ohms
Passive MF/HF @ 8 Ohms
26
(1)
115Hz - 23kHz
(1)
90Hz - 27kHz
(2)
105dB (2.0V @ 4 Ohms)
115dB (2.83V @ 8 Ohms)
105dB (2.0V @ 4 Ohms)
115dB (2.83V @ 8 Ohms)
115dB (2.83V @ 8 Ohms)
60 degrees conical
2 x 300mm (12.00") Low
Frequency Transducers,
Semi Horn Loaded
Dual Concentric™
Compression driver
loaded into a single
PSW™ Waveguide
Bi-amp 450Hz (active)
7kHz (passive)
Tri-amp 450Hz, 7kHz (active)
21.2 averaged 1kHz to 10kHz
13.3 averaged 1kHz to 10kHz
(2)
Average Peak
135dB 141dB
138dB 144dB
135dB 141dB
138dB 144dB
Average Peak
1000W (63.3V) 2000W
200W (40V) 400W
90W (27V) 180W
200W (40V) 400W
Recommended Amplifier Power
Low Frequency
Mid Frequency
High Frequency
Passive MF/HF
Nominal Impedance
Low Frequency
Mid Frequency
High Frequency
Construction
Enclosure
Grille
Finish
Connectors
Fittings
Dimensions
NET Weight
Notes:
(1) Average over stated bandwidth. Measured at 3 metres on axis, then referred
to 1 metre
(2) Unweighted pink noise input, measured at 3 metres in an anechoic chamber,
then referred to 1 metre
(3) Accelerated Life Test (EIA RS426-B)\
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
2000W into 4 Ohms
400W into 8 Ohms
200W into 8 Ohms
400W into 8 Ohms
4 Ohms (4.1 Ohms Minimum)
8 Ohms (7.0 Ohms Minimum)
8 Ohms (8.7 Ohms Minimum)
18mm (0.71") birch plywood.
Vented and internally braced.
Powder coated perforated steel grille
Black or white textured paint
(custom colours on request)
Barrier Strip
8 x Recessed carrying handles
12 x M10 flying inserts
925mm x 694mm x 515mm
(36.42" x 27.32" x 20.28")
77kg (170.0 lbs)