Unpacking; Connectors/Cabling - Tannoy VQ 60 User Manual

2 UNPACKING

Every Tannoy VQ product is carefully tested and inspected before being packaged and leaving the factory. After
unpacking your loudspeaker, please inspect for any exterior physical damage, and save the carton and any
relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that
damage has been sustained in transit notify your dealer immediately. If this loudspeaker has to be returned to
Tannoy, contact the Service Department for a Return Authorization Number. Use the original shipping carton and
packing materials where possible. Tannoy will not be responsible for damage caused by inadequate packing.

3 CONNECTORS/CABLING

Input Connector Panels
Note : The VQ 60 and VQ 100 are configured as standard for Bi-Amp operation.
Tri-Amp operation is possible using the Barrier strip input terminals. See Barrier Strip Connections on
the following page for further details.
The VQ DF is configured as standard for single amp operation. Bi-Amp operation is possible using the Barrier
strip input terminals. See Barrier Strip Connections on the following page for further details.
The VQ MB is configured for single amp operation.
4
VQ 60 / 100
VQ MB
VQ DF