Keithley 2010 User Manual page 249

Table D-1 (cont.)
Models 196/199 device-dependent command summary
Mode
Filter
Rate
Trigger mode
Reading mode
Data store size
Interval
Value V±nn.nnnn or
V±n.nnnnnnE+n
Default conditions
Data format
SRQ
Command Description
P0 Filter disabled
P1 Moving filter (count = 10)
P2 Repeat filter (count = 10)
S0 0.1 PLC integration
S1 Line cycle integration (16.67ms, 60Hz; 20ms, 50Hz)
S2 10 PLC (166.67ms integration, 60Hz;
200ms integration, 50Hz)
T0 Continuous on Talk
T1 One-shot on Talk
T2 Continuous on GET
T3 One-shot on GET
T4 Continuous on X
T5 One-shot on X
T6 Continuous on External Trigger
T7 One-shot on External Trigger
B0 Readings from A/D converter
B1 Individual readings from data store
B2 All readings from data store (buffer dump)
I0 Disable data store
In Data store of n (n=1 to 500), fill and stop
Q0 Default interval, 175ms (SELECT OFF)
Qn n=interval in milliseconds (15ms to 999999ms)
Zero value, simulated reference junction temperature
L0 Restore factory default conditions
G0 Reading with prefix.
G1 Reading without prefix.
G2 Reading and buffer location with prefix.
G3 Reading and buffer location without prefix.
G4 Reading and channel with prefix.
G5 Reading and channel without prefix.
G6 Reading, buffer location, and channel with prefix.
G7 Reading, buffer location, and channel without prefix.
M0 Disable
M1 Reading overflow
M2 Data store full
M4 Data store half full
M8 Reading done
M16 Ready
M32 Error
Models 196/199 Commands D-3