Key <Nrf> Command - Keithley 2010 User Manual

5-68 SCPI Command Reference
:KEY <NRf> command
:SYSTem:KEY <NRf>
Parameters
Query
Description
<NRf> = 1 SHIFT key <NRf> = 17
2 DCV key
3 ACV key
4 DCI key
5 ACI
Ω2 key
6
Ω4 key
7
8 FREQ key
9 —
10 —
11 up arrow key
12 AUTO key
13 down arrow key
14 ENTER key
15 right arrow key
16 TEMP key
:KEY? Query last "pressed" key.
This command is used to simulate front panel key presses. For example, to
select DCV you can send the following command to simulate pressing the
DCV key:
:syst:key 2
The parameter listing provides the key-press code in numeric order.
Figure 5-10 also illustrates the key-press codes.
The queue for the :KEY? query command can only hold one key-press.
When :KEY? is sent over the bus, and the Model 2010 is addressed to talk,
the key-press code number for the last key pressed (either physically or with
:KEY) is sent to the computer.
Simulate key-press
LOCAL key
18 EX TRIG key
19 TRIG key
20 STORE key
21 RECALL key
22 FILTER key
23 REL key
24 left arrow key
25 —
26 OPEN key
27 CLOSE key
28 STEP key
29 SCAN key
30 DIGITS key
31 RATE key
32 EXIT key