Diode Command - Keithley 2010 User Manual

:ALPHa <NRf>
[:SENSe[1]]:TEMPerature:FRTD:ALPHa <NRf>
Parameters
Query
Description
:BETA <NRf>
[:SENSe[1]]:TEMPerature:FRTD:BETA <NRf>
Parameters
Query
Description
:DELTa <NRf>
[:SENSe[1]]:TEMPerature:FRTD:DELTa <NRf>
Parameters
Query
Description

:DIODe command

:RANGe[:UPPer] <NRf>
[:SENSe[1]]:DIODe:CURRent:RANGe[:UPPer] <NRf>
Parameters
Query
Description
<NRf> = 0 to 0.01
:ALPHa?
This command is used to check and/or change the alpha value. Remember
that if you change the present alpha value, the FRTD TYPE will change to
USER.
<NRf> = 0 to 1.00
:BETA?
This command is used to check and/or change the beta value. Remember that
if you change the present beta value, the FRTD TYPE will change to USER.
<NRf> = 0 to 5.00
:DELTa?
This command is used to check and/or change the delta value. Remember
that if you change the present delta value, the FRTD TYPE will change to
USER.
<NRf> = 0 to 1e-3 Specify diode test current
[UPPer]?
There are three current ranges available for the diode test: 10µA range,
100µA range, and the 1mA range. Range is selected by using this command
to specify the expected current for the diode under test. The instrument will
then automatically select the appropriate range.
SCPI Command Reference
Specify alpha value
Specify FRTD alpha value
Query value of ALPHa
Specify beta value
Specify FRTD beta value
Query value of BETA
Specify delta value
Specify FRTD delta value
Query value of DELTa
Select current range for diode test
Query selected range
5-53