Table of Contents
Advertisement
8.2.2. UPnP
If your camera is connected to the Internet through a router, you need to use a router with
UPnP support to automatically forward the ports. You also need to enable the option for UPnP on
your IP camera and router and adjust their settings (Pic. 8.7).
To activate the option switch it to [On].
Turn On UPnP port forwarding: select this item with a check mark to change port
numbers within the range from 1124 to 65534.
NOTE:
To use UPnP, your network router must support it
HTTP Port: type your camera HTTP port to access it over the Internet. For example, the
value of the port you assigned is 10000. In this case, port 80 is used to access the camera over a
local network and port 10000 is used to access the camera over the Internet. The default value is
80.
SSL Port: type the SSL port number to access the camera through a secure connection
HTTPS over the Internet. The default value is 443.
RTSP Port: type the RTSP port number to access the camera over the Internet. The default
value is 554.
N37210 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.7
.
40
Advertisement
Table of Contents
