Beward N37210 Owner's Manual page 69

IMPORTANT:
The number of the frames which are recorded to a memory card will be equal to the sum of shown frame
values before and after alarm event triggered and also a frame at the moment of alarm event triggering.
So, the total number of the frames included to the sending by alarm event is Pre-event Image number +
Post-event Image number + 1 frame.
Image File Name: enter a file name which will correspond to the names of all files sent to
the FTP server.
Suffix: select suffix which will be added to the file:

None: no suffix added.

Date/Time: add date and time of file creation. The suffix includes: 4 numbers for a
year, 2 numbers for a month, 2 numbers for a date, 2 numbers for hours, 2 numbers
for minutes, 2 numbers for seconds. As a result 14 numbers will be added to the
suffix.

Sequence Number: add a sequence number to the file name. it starts from 000001
and is a number sequence with increasing of the next values for 1. You can reset
this number by pressing the [Clear] button.
IMPORTANT:
When you add the FTP server with "Snapshot" as the type of attached files it is important to control the
volume of available buffer memory. In case of buffer overfilling a notification will be sent.
If you select "Video" as a file type the following items are available (Picture 11.6).
Pre-event Recording: set the duration of video recorded by the camera before alarm event
triggered (values: 0 to 7).
Post-event Recording: set the duration of video recorded by the camera after alarm event
triggered (values: 1 to 7).
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.6
68