Table of Contents
Advertisement
Press [Add] or [Edit] button and "Event Configuration" window will open (Pic. 11.24). It
contains 4 settings groups: "General", "Trigger", "Action", "Schedule".
Name: enter the name of the created event.
Event: [On] – the current event is active. [Off] – the current event is inactive.
Trigger: select alarm event type to execute an action set in "Action" setting group. The
following event types are available. "Motion Detection", "Audio Detection", "Tampering
Detection", "Digital Input", "Periodical", "Onboot", "IR Cut Filter", "Capacity Warning",
"Network Link Down", "IP Notification".
Depending on the type of an alarm event the different items of this settings group will be
available.
If you set data sending triggered by some alarm event then sent files will be named
according to this event. It makes further data operation simpler. Look at the table below. It contains
events names and their abbreviations.
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.24
87
Advertisement
Table of Contents
