Upnp (Universal Plug And Play) - Beward N6603 User Manual

Periodical update: select an update frequency for your camera to update its IP address on
the DDNS server when the camera's address is changed. The following options are available:
 Auto: the IP address is automatically updated.
 Periodically: allows you to set an interval for updating the IP address on the DDNS
server. The following values are available: 5, 10, 15, 30, 60 minutes.
The camera IP address can be updated if it is connected to the Internet, turned on, and the
option for DHCP is enabled.
IMPORTANT:
You must restart the camera for the changes to take effect. To do so, go to SETTING – Basic – System –
Initialize.

6.3.4. UPnP (Universal Plug and Play)

If your camera is connected to the Internet through a router, you need to use a router with
UPnP support to automatically forward the ports. You also need to enable the option for UPnP on
your IP camera and router and adjust their settings (Pic. 6.24).
NOTE:
To use UPnP, your network router must support it
HTTP port: type your camera HTTP port to access it over the Internet. For example, the
value of the port you assigned is 10000. In this case, port 80 is used to access the camera over a
local network and port 10000 is used to access the camera over the Internet. The default value is
80.
SSL port: type the SSL port number to access the camera through a secure connection
HTTPS over the Internet. The default value is 443.
RTSP (MPEG-4) port: type the RTSP port number to access the camera over the Internet.
The default value is 554.
N6603 Operations User Manual
.
Chapter 6. SETTING: Basic
43