Table of Contents
Advertisement
User ID: enter the user name to get an access to the e-mail server (up to 64 symbols).
Password: enter a password (up to 64 symbols).
Re-type password: enter the password again to avoid a mistake.
Proxy Address: if proxy server is used then enter a name or IP address (up to 64
symbols).
Proxy Port: if proxy server is used then enter a port to access to the server (1 to 65535).
Proxy User Name: if proxy server is used then enter user name to access to the server (up
to 64 symbols).
Proxy Password: if proxy server is used then enter a password to acces to the proxy
server (up to 32 symbols).
NOTE:
If proxy server is not used then do not fill the last four fields.
[Test]: click this button to check if the connection to the device and all commands are
correct.
NOTE:
To save changes press the [Save] button, the HTTP server window will be closed. If you do not want to
save any changes press the [Cancel] button..
11.1.1.4. Network Storage
To configure NAS server go to SETTING – Event – Event Server – Event Server menu
and press the [Add] button to open the configuration window. Then select "Network Storage" as
a server type (Pic. 11.13).
IMPORTANT:
Only one network storage could be added as an event server. If it is already added this item will be not
available in the [Server type] field.
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
76
Advertisement
Table of Contents
