Table of Contents
Advertisement
IMPORTANT!
When setting this menu item note that this configuration will be applied to several camera functions using
motion detection (data recording to NAS, to FTP server etc.).
11.5 Tampering detection
Tampering detection allows informing surveillance services and operators about the camera
status. So if a criminal covers the IP camera lens, then detection will trigger.
To set a tampering detection go to SETTINGS – Event – Tampering Detection menu and
select [On] to make settings available (Pic. 11.41).
Trigger duration: set the duration of lens covering after which tampering detection will
trigger. The values from 5 to 900 sec are available.
NOTE:
To save changes press the [Save] button, to cancel them press the [Cancel] button.
IMPORTANT!
Maximum recording duration will be equal to the sum of «Pre-event Recording» and «Post-event
Recording» time intervals for a certain event server. For details, please, see paragraphs 11.1.1.1,
11.1.1.2
and 11.1.1.4.
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.41
100
Advertisement
Table of Contents
