Upnp - Beward N13201 Operation User's Manual

Profile Name: select a profile for which RTSP settings will be active.
Profile: enter profile name. This name should be entered in address line for viewing video
with settings of corresponding profile. You can change a profile name. To access to the stream
from the camera you should enter in address line, for example: rtsp://<IP>/video.pro1, where
<IP> is a public camera IP-address, "video.pro1" is used profile name.
Authentication: authorization on/off when attempting to view video from the camera with
profile settings.
"Multicast" group includes (Pic. 8.11).
Status: turn on/off multicast stream.
IMPORTANT:
The router of your network should support a multicast protocol.
Access Name: displays a value for access to multicast. You can change current value.
Multicast Address: IP address of multicast. In this window you can set IP address for
current profile.
Video port: a video port for multicast. It can be selected automatically or manually from
1124 to 65534.
Audio port: an audio port for multicast. It can be selected automatically or manually from
1124 to 65534.
Time-To-Live: set a time to live for packets. TTL value can be set from 1 to 255.
NOTE:
TTL is a parameter corresponding to maximum period of packets existing.

8.2.2. UPnP

If your camera is connected to the Internet through a router, you need to use a router with
UPnP support to automatically forward the ports. You also need to enable the option for UPnP on
your IP camera and router and adjust their settings (Pic. 8.12).
N13201 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.11
43