Table of Contents
Advertisement
Send (Post-event Image): enter the number of files (0 to 7) recorded by the camera after
an alarm event triggered which will be included to the total number of files sent to the storage (Pic.
11.15).
IMPORTANT:
The number of the frames which are recorded to a memory card will be equal to the sum of shown frame
values before and after alarm event triggered and also a frame at the moment of alarm event triggering.
So, the total number of the frames included to the sending by alarm event is Pre-event Image number +
Post-event Image number + 1 frame.
Image File name: enter a file name which will correspond to the names of all files sent to
NAS.
IMPORTANT:
When you add the NAS server with "Snapshot" as the type of attached files it is important to control the
volume of available buffer memory. In case of buffer overfilling a notification will be sent.
If you select "Video" file type then setting group contains the following items (Pic. 11.16):
Pre-event Recording: set the duration of video recorded by the camera before alarm event
triggered (values: 0 to 7).
Post-event Recording: set the duration of video recorded by the camera after alarm event
triggered (values: 1 to 7).
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.15
Pic. 11.16
79
Advertisement
Table of Contents
