Beward N37210 Owner's Manual page 51

IR Cut Filter Mode: allows you to set the parameters of [Day] and [Night] modes.

Auto: the camera passes to Day or Night mode automatically.

Night: the camera works in the Night mode continuously.

Day: the camera works in the Day mode continuously.

Schedule: scheduled passage to Day or Night mode.
Depending on selected working mode the following settings will be available:
IR Cut Filter Switch Dalay: set the latency time in seconds (from 1 to 10) to turn on/off
Day/Night modes.
IR Cut Filter Threshold: allows you to change the thresholds of turning on/off Day/Night
modes and IR LED. To change the value set the necessary values by the sliders or enter them
manually (from 0 to 100).
NOTE:
The threshold value for passage to [Day] mode cannot be less than the value for passage to [Night] mode.
IR Mode: allows you to set the modes of IR LED.

Auto: IR LED is turned on automatically.

Active: IR LED is turned on continuously.

Inactive: IR LED is turned off continuously.

Schedule: IR LED is turned on by schedule.
N37210 Operations User Manual
Chapter 9. The [SETTING] Menu: Live View
Pic. 9.6
50