Table of Contents
Advertisement
Name: enter the server name which you will see in the [Name] column of the [Event
Server] field (Pic. 11.1).
Server Type: select a server type: FTP, SMTP, HTTP, Network Storage.
Network Address: enter an IP address or the domain name of the FTP server (up to 64
symbols).
Server Port: enter a port of the FTP server (default value is 21).
Upload Path: enter the path to a recorded files store folder on the FTP server (up to 64
symbols). For example: IP_camera/example.
User Name: enter the user name to access to the FTP server.
Password: enter the password to access to the FTP server.
Re-type Password: enter the password again to avoid a mistake.
Passive Mode: [On] – a passive mode to access the FTP server (the same as in the web
browser), [Off] – use an active mode to access to the FTP server.
[Test]: click this button sent a test file to the FTP server for checking the connection
parameters. If everything was done correctly, you will see a window with an inscription about the
successful test passing: "FTP Test Success" (Pic. 11.3).
If the settings are incorrect or there is the other reason, then you will see a window with the
information about an error: "FTP Test Failed" (Pic. 11.4).
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.3
66
Advertisement
Table of Contents
