Using The Upnp Option - Beward N300 Installation & User Manual

6.3.1. Using the UPnP Option

Before using UPnP, make sure your router supports port forwarding between LAN and
WAN networks. If so, follow the steps below to provide the Internet access to your camera:
 Enable UPnP on your router and configure it.
IMPORTANT!
Some routers do not support port forwarding between LAN and WAN networks over UPnP. Before
configuring, make sure your router supports this option. If not, additional setting is required.
 Enable UPnP on your camera and configure it.
See your router's user manual for details on how to enable and configure the UPnP.
To enable and configure UPnP on your camera, follow the steps below:
Step 1: enable UPnP on your camera. To do so, click the
Network – Advanced – UPnP.
Step 2: check the [Turn On UPnP port forwarding] (Pic. 6.3.).
Step 3: in the [HTTP port] field, enter the HTTP port number that you want to use to
access the camera over the Internet. For example, the value of the port you assigned is 10000. In
this case, port 80 is used to access the camera over a local network and port 10000 is used to
access the camera over the Internet.
N300 Installation User Manual
Chapter 6. Accessing the Camera over Internet
Pic. 6.3
[SETTING] button and go to
42