Upnp (Universal Plug And Play) - Beward N 13102 Operation User's Manual

8.4. UPnP (Universal Plug and Play)

If your camera is connected to the Internet through a router, you need to use a router with
UPnP support to automatically forward the ports. You also need to enable the option for UPnP on
your IP camera and router and adjust their settings (Pic. 8.5).
NOTE:
To use UPnP, your network router must support it
HTTP port: type your camera HTTP port to access it over the Internet. For example, the
value of the port you assigned is 10000. In this case, port 80 is used to access the camera over a
local network and port 10000 is used to access the camera over the Internet. The default value is
80.
SSL port: type the SSL port number to access the camera through a secure connection
HTTPS over the Internet. The default value is 443.
RTSP port: type the RTSP port number to access the camera over the Internet. The default
value is 554.
NOTE:
Please refer to the user manual to enable and configure the option for UPnP on your router.
IMPORTANT:
Some routers do not support UPnP to forward LAN and WAN ports. Make sure your router supports this
option.
IMPORTANT:
You must restart the camera for the changes to take effect. To do so, go to SETTING – System –
Initialize.
N13102 Operations User Manual
.
Pic. 8.5
Chapter 8. SETTING: Network
45