Video Buffer - Beward N37210 Owner's Manual

Outdoor high-quality 2-megapixel ip camera

Table of Contents

TCP: select this item to stream video over TCP, RTSP is used as a control protocol.

UDP: select this item to stream video over UDP, RTSP is used as a control protocol.

When selecting any of available transport protocols, it automatically assigns data port:

HTTP – 80, TCP – 554. If UDP is selected, it uses strictly defined port numbers range. The port

number is assigned when the camera establishes connection with a client.

NOTE:

«HTTP» protocol is for networks where port number restriction is used. When such a security policy is

applied, most of the nonstandard ports are closed but port 80 is often open (443, 554, etc) and is used by

this connection type.

5.3.4. Video Buffer

This item allows you to enable or disable video buffer function. When this function is

enabled, it makes the video stream from the IP camera smoother when the connection is unstable

but may cause image delays up to several seconds.

N37210 Operations User Manual

Chapter 5. Web interface Main Page

Table of Contents