Table of Contents
Advertisement
Profile Name: select a profile for which RTSP settings will be active.
Profile: enter profile name. This name should be entered in address line for viewing video
with settings of corresponding profile. You can change a profile name. To access to the stream
from the camera you should enter in address line, for example: rtsp://<IP>/video.pro1, where
<IP> is a public camera IP-address, "video.pro1" is used profile name.
Authentication: authorization on/off when attempting to view video from the camera with
profile settings.
"Multicast" group includes (Pic. 8.6).
Status: turn on/off multicast stream.
IMPORTANT:
The router of your network should support a multicast protocol.
Access Name: displays a value for access to multicast. You can change current value.
Multicast Address: IP address of multicast. In this window you can set IP address for
current profile.
Video port: a video port for multicast. It can be selected automatically or manually from
1124 to 65534.
Audio port: an audio port for multicast. It can be selected automatically or manually from
1124 to 65534.
Time-To-Live: set a time to live for packets. TTL value can be set from 1 to 255.
NOTE:
TTL is a parameter corresponding to maximum period of packets existing.
N37210 Operations User Manual
Chapter 8. The [SETTING] Menu: Network
Pic. 8.5
Pic. 8.6
39
Advertisement
Table of Contents
