Table of Contents
Advertisement
When using Windows OS based networks you should enter additional parameters.
Workgroup: enter a name of working group for Windows networks. This name should be
the same with PC working group with the open-access folder or NAS server.
User name: enter user name to authorization on the remote PC or NAS server.
Password: enter a password.
Re-type password: enter the password again to avoid a mistake.
Recording Folder: enter a name for the folder which will be created for file recording.
NOTE:
Be sure that the selected user has the right to create the folders and record the files.
After entering all parameters you can check their correctness by pressing [Test] button. If
all parameters are correct then the window with the information of successful test will appear (Pic.
11.14).
If the test failed, check the network device address, its availability and account settings.
The [Media Setting] section allows setting the sent files.
Available Memory Buffer: displays free and total volume of the internal camera memory
which is used for operating the specified type files.
Attached type: select a type of a file which will be sent:
Snapshot: send to NAS the frames (static image) in the JPG format.
Video: send to NAS video in AVI format.
System log: send to NAS the camera system log.
If the "Snapshot" type is selected then the following settings are available:
Send (Pre-event Image): enter the number of files (0 to 7) recorded by the camera before
an alarm event triggered which will be included to the total number of files sent to the storage (Pic.
11.15).
N37210 Operations User Manual
Chapter 11. The [SETTING] Menu: Event
Pic. 11.14
78
Advertisement
Table of Contents
