Table of Contents
Advertisement
Ceiling mount section
Terminal
H
I
J
K
H
Reverse side
.
H Fixing holes (x3)
This hole is for mounting the ceiling clamping
bracket to the ceiling or the ceiling recessed
bracket (WB-S685U: Sold separately).
L
I [AC24VHINPUT] AC 24 V input terminal
For connecting to AC 24 V power.
(A P23 [Connect the power cable.] )
J [10BASE-T/100BASE-TX] LAN cable
M
connection terminal
For connecting the unit to the network.
It supports PoE Plus (IEEE802.3at Type 2) and
N
enables you to use this camera without having
to connect to a power supply using a power
cord.
(A P23 [Connect the LAN cable.] )
K Alarm signal terminal (8-pin)
For connecting the alarm signal cable.
(A P17 [Alarm Input/Output Signal] )
(A P24 [Connect the alarm signal cable to the
alarm signal terminal.] )
List of Alarm Signal Terminal Signals
Pin Number
1
2
3
4
5
6
7
O
8
L Fall prevention wire (for ceiling) mounting hole
Mount a fall prevention wire (for ceiling) from the
ceiling slab or channel to this hole to prevent the
camera from falling.
Memo :
The fall prevention wire (for ceiling) is not
0
supplied.
M Wire clamp fixing hole
This is used to bundle wires.
N Fall prevention wire fixing bracket
This is for attaching the "fall prevention wire D"
of the camera.
O Camera connection terminal (female)
For connecting to the connection terminal
(male) of the camera.
Signal Name
INPUT1
INPUT1 COM
INPUT2
INPUT2 COM
OUTPUT1
OUTPUT1 COM
OUTPUT2
OUTPUT2 COM
Name of Parts
15
Advertisement
Table of Contents
