Vn-H657Wpu - JVC VN-H657U Instructions Manual

Hd ip ptz camera, outdoor hd ip ptz camera
Hide thumbs Also See for VN-H657U:
Table of Contents

Advertisement

VN-H657WPU

A
B
C
D
E
A
F
G
.
A Camera securing hole (x4)
This hole is used for mounting the camera on
the wall.
B Cable connecting hole, cap
Remove the cap and pull out the cables from
this hole for connection.
(A P28 [Remove the cable connection cap.] )
C Fall prevention wire
Connects the camera to the wall. Secure the
camera tightly to the anchor bolts used to mount
the fall prevention wire on the wall.
(A P29 [Mount the fall prevention wire.] )
D AC 24 V power cable
For connecting to AC 24 V power.
(A P29 [Connect the power cable.] )
Name of Parts
16
E Alarm signal cable (8 pcs)
This cable is for alarm input and alarm output.
(A P30 [Connect the alarm signal cable.] )
List of Alarm Signal Cable Signals
Cable color
Brown
Red
Orange
Yellow
Green
Blue
Purple
H
Gray
F LAN cable
For connecting the unit to the network.
I
It supports PoE Plus (IEEE802.3at Type 2) and
enables you to use this camera without having
to connect to a power supply using a power
cord.
(A P30 [Connect the LAN cable.] )
G Heater ON/OFF switch
J
This is the ON/OFF switch of the built-in heater.
The built-in heater prevents the dome cover
from fogging up and snow or frost from
K
attaching to the dome cover. When installing the
heater at an unrequired location, turn OFF the
L
switch of the heater. When it is set to ON, the
heater will be automatically controlled to adjust
the internal temperature to an appropriate level.
It is usually set to ON.
(A P27 [Installation and Connection
Preparations (VN-H657WPU)] )
H Dome cover fixing screws (x4)
I Dome cover
The dome cover is a delicate object. Handle it
with care.
Note :
It is covered with a protective sheet during
0
shipment. Do not remove this sheet until
installation is complete.
J [MAC address] indication
The MAC address is a unique physical address
of the product. This address cannot be altered.
K Camera head
L Lens (camera module)
You cannot replace the lens alone.
Signal Name
Input 1
Input 1 (COM)
Input 2
Input 2 (COM)
Output 1
Output 1 (COM)
Output 2
Output 2 (COM)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vn-h657wpu

Table of Contents