Table of Contents
Advertisement
7 Attach the cap, and seal the cable
connection hole and areas around the
camera's mounting surface and the
four anchor bolt fasteners with a
waterproof sealant (GE silicon).
Waterproof
treatment
(x4)
Waterproof
treatment
.
Note :
Ensure that waterproof treatment is performed.
0
Otherwise, the camera may malfunction due to
rain water seepage.
Use GE silicon or other similar product for the
0
sealing material.
8 Remove the dome cover protective
sheet.
Protective
sheet
.
Installation of the camera is complete. Next, set
the IP address of the camera.
(A P32 [IP Address Setting Procedure] )
Removing the Camera
1 Dismantle following the steps for
mounting in the reverse order.
Cap
Mounting the Camera (VN-H657WPU)
31
Advertisement
Table of Contents
