Table of Contents
Advertisement
Viewer Setup
Switches the Operation Menu to the Viewer Setup
Menu.
Click this button when you want to configure the
settings of [Unicast], [Multicast], [On Screen
Display], and [Other].
(A P84 [[Unicast] Settings] )
(A P85 [[Multicast] Settings] )
(A P86 [[On Screen Display] Settings] )
(A P87 [[Other] Settings] )
Stop/Play
Pauses or plays back images.
Capture
Captures the currently displayed image in your
computer. The image is recorded as a JPEG file in
the folder that is created under the [Document]
folder of the computer.
The default folder name is "model name". (For
example, the folder name is "VN-H657WP" in the
case of VN-H657WPU.)
The file name is made up of "year, month, day,
hour, minute, second, and millisecond".
Memo :
You can rename the folder in the [Other]
0
settings.
(A P87 [[Other] Settings] )
Note :
The clock time of this file name is the clock time
0
of the computer. Note that it is not the "Time" of
the camera.
You cannot save images as motion images.
0
You cannot save H.264 images.
0
Protocol
Selects a protocol to be used when the viewer
acquires data from the camera.
HTTP(Unicast):
0
Allows monitoring the camera with a single
viewer. If a packet is lost, the packet data is
transmitted again and recovered.
RTP(Multicast):
0
Allows multiple viewers to monitor the camera.
[Set values: RHTTP(Unicast), RTP(Multicast)]
Memo :
When playing back via multicast, start multicast
0
sending on the [Multicast] page.
(A P64 [[Multicast] Page] )
Note :
If you select "RTP(Multicast)" and start the
0
Built-in Viewer, you may be alarmed by the
Windows Firewall.
In this case, select "Do not block" and proceed
to the next step.
If you select "Block", the multicast stream will be
0
blocked by the Windows Firewall. The viewer
cannot play back multicast data.
Encoder
Select the stream when the protocol is
"HTTP(Unicast)".
[Set values: RNo.1, No.2, No.3]
Compression format and Framesize
Displays the stream type and the resolution.
Memo :
When [Framesize] is set to "1920´1080", the
0
video image displayed may be slightly disrupted
at the top edge.
Display Size
Sets a display size of image area.
Fixed:
0
Sets the image display size to the same as the
preset frame size. For frame size setting, see
[Encoding] page of [Advanced Settings].
(A P45 [[Encoding] Page] )
Variable:
0
Displays images according to the Web
browser's window size.
[Set values: RFixed, Variable]
Memo :
The window size of the Web browser does not
0
change even if you select the "Fixed" or
"Variable" display size.
Details
Opens the Settings page. The display page varies
depending on the access authorization of the user.
admin: [Basic Setting1] Page
0
operator: [Basic Setting2] Page
0
user: [Miscellaneous] Page
0
(A P37 [How to Open the Settings Page] )
Built-in Viewer Screen Configuration
75
Advertisement
Table of Contents
