Table of Contents
Advertisement
How to Open the Settings
Page
1 Enter the URL of camera in the address
bar of Internet Explorer
The factory default URL is
0
"http://192.168.0.2".
Memo :
For details on the IP address to specify for the
0
URL of the camera, refer to the following.
(A P32 [IP Address Setting Procedure] )
2 Enter the user name and password.
The factory default is "admin" and "jvc".
0
After entering a correct user name and
0
password, the Built-in Viewer of the camera
is displayed.
.
3 Click [Details].
[Basic Setting1] page will be opened if
0
accessed by user name "admin".
(A P38 [[Basic Setting1] Page] )
[Basic Setting2] page will be opened if
0
accessed by user name "operator".
(A P39 [[Basic Setting2] Page] )
[Miscellaneous] page will be opened if
0
accessed by user name "user".
(A P68 [[Miscellaneous] Page] )
Built-in Viewer Menu List
The following items can be set. Depending on the
logged-in user name, some items may not be set
due to the access authorization. In such case,
items won't be displayed.
[Basic Setting1] (*1) ..................................... P 38
[Basic Setting2] (*2) ..................................... P 39
[Advanced Settings] .................................... P 41
- [Camera] (*2) ........................................... P 41
- [Encoding] (*2) ........................................ P 45
- [Alarm] (*2) .............................................. P 48
- [Alarm Environment] (*2) ......................... P 50
- [Alarm Output] ..................................... P 51
- [FTP Recording] (*2) ............................... P 52
- [PTZ] (*2) ................................................. P 54
- [Limit] ................................................... P 54
- [Preset Position Speed] ....................... P 55
- [Auto Flip] ............................................ P 55
- [Auto Patrol] (*2) ...................................... P 56
- [Privacy Mask] (*2) .................................. P 57
- [Motion Detection] (*2) ............................ P 59
- [Tampering Detection] (*2) ...................... P 60
- [Network] (*1) .......................................... P 61
- [IP Setting] ........................................... P 61
- [Other] ................................................. P 61
- [Protocol] (*1) .......................................... P 62
- [Multicast] (*2) ......................................... P 64
- [Time] (*1) ............................................... P 65
- [Password] (*1) ........................................ P 66
- [Maintenance] (*1) ................................... P 67
- [Miscellaneous] ....................................... P 68
- [Operation] (*2) ........................................ P 68
- [Operation] .......................................... P 68
- [Log] .................................................... P 68
- [Settings] (*2) .......................................... P 69
- [Position List] (*2) .................................... P 69
- [Patrol Settings] (*2) ................................ P 70
*1
Displayed if logged in by user name "admin".
*2
Displayed if logged in by user name "admin"
or "operator".
How to Open the Settings Page
37
Advertisement
Table of Contents
