Table of Contents
Advertisement
Action Position Number
Set the position number to move to when [Action]
item is set to "Position".
[Set values: 0 to 99]
Memo :
Specify the setting for Preset Position in [PTZ
0
Settings] of Built-in Viewer.
(A P78 [ [PTZ Settings] ] )
Pin Output1 Make, Pin Output1 Break, Pin
Output2 Make, Pin Output2 Break
Alarm Output Duration:
0
Specify the output time when the [Action] item is
set to "Pin Output1 Make", "Pin Output1 Break",
"Pin Output2 Make", or "Pin Output2 Break".
[Set values: 0, 100 to 5000] msec
Trigger Position Number
Set the preset position number to be used as the
trigger when [1st Trigger] is set to "Position".
[Set values: 0 to 99]
Memo :
Specify the setting for Preset Position in [PTZ
0
Settings] of Built-in Viewer.
(A P78 [ [PTZ Settings] ] )
Time
Executes an action at the time you have entered.
[Set values: 00 H 00 M to 23 H 59 M]
Time Filter
For specifying the alarm action with respect to each
day of the week and setting the corresponding time
of the day.
Applicable day of week:
0
Sunday, Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday
Alarm action:
0
Unmask All, Mask All, Unmask Span, Mask
Span
Applicable time period:
0
Specify the starting and ending time of the alarm
in hours and minutes.
[Advanced Settings] Page - [Alarm] Page
50
[Alarm Environment] Page
This page sets up the alarm environment.
This page can be used during access using
"admin" or "operator".
Click [Advanced Settings] in the side menu, and
0
click [Alarm Environment].
Press the [OK] button to enable the new
0
settings.
If the [OK] button is pressed upon entering an
0
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
Settings
.
* Setting values with R are default values.
Advertisement
Table of Contents
