Table of Contents
Advertisement
[Protocol] Page
This page sets the protocol.
This page can be used during access using
"admin".
Memo :
Press the [OK] button to enable the new
0
settings.
If the [OK] button is pressed upon entering an
0
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made. If you press the
[Cancel] button, other changed items will also be
restored to the values before the change was
made.
When you connect via Internet Explorer after
0
changing protocol settings, enter the address
using the new server port and port number in the
address bar.
Settings
.
* Setting values with R are default values.
Server Certificate
For specifying settings related to the server
certificate.
9 Register Information
Pressing the [Information] button displays the valid
server certificate.
.
[Advanced Settings] Page - [Protocol] Page
62
9 Local Certification
This page is for creating a new server certificate for
local authentication.
Press the [Create Server Certificate] button to
create the server certificate.
Note :
Do not use the sample that has been preset for
0
the server certificate. Make sure that you create
a new server certificate.
.
Memo :
The characters that can be input varies with
0
each item.
Item
Country Code (2 letter
code)
State
City
Organization
Organization Unit
Common Name
Mail Address
9 Country Code (2 letter code)
Enter the country code of the local certification
authority.
The country code is made up of two Latin
characters specified by the ISO3166-1 alpha-2
standard.
9 State
Enter the state of the local certification authority.
9 City
Enter the municipality of the local certification
authority.
9 Organization
Enter the organization name of the local
certification authority.
9 Organization Unit
Enter the department of the local certification
authority.
Usable Characters
A-Z
a-zA-Z0-9_ .,+/()-
a-zA-Z0-9 .-
a-zA-Z0-9_@.+"#$-
Advertisement
Table of Contents
