Table of Contents
Advertisement
[On Screen Display] Settings
Sets a display item on the viewer screen.
For the Built-in Viewer, characters are displayed as
overlay on the video image.
This page can be used during access using
"admin" or "operator".
When the Control Menu is open, click [Viewer
0
Setup] to switch to the Viewer Setup Menu.
Click [On Screen Display] to open the Settings
0
screen.
When you click the [Apply] button, the current
0
settings are made valid on the viewer and they
are stored in the computer.
On Screen Display
.
Camera ID
When "ON" is selected, the [Camera ID] is
displayed at the top of the screen.
You can set the [Camera ID] from the camera's
[Basic Setting2] or [Camera] Page.
(A P39 [[Basic Setting2] Page] )
(A P41 [[Camera] Page] )
[Set values: ON, OFF]
[Viewer Setup] - [On Screen Display] Settings
86
Position Title
When "ON" is selected, the position title is
displayed in the lower left of the screen.
[Set values: ON, OFF]
Disp MD / Tampering
Selecting "ON" displays a red frame around the
area in the image where motion or tampering is
detected.
[Set values: ON, OFF]
Time
Set to "ON" to display the time.
Displays the time information stored in the JPEG
data or stream data at the bottom right of the
screen.
* Stream data: Stream data encoded with H.264
Baseline or H.264 High.
[Set values: ON, OFF]
Memo :
You can display the time at the bottom right
0
corner of the screen by setting Time under
[Viewer Setup] of the Built-in Viewer to "ON".
Normally, the characters are displayed in white.
If the level of performance is not sufficient for
decoding and displaying the received video, the
time display on the Built-in Viewer screen may
appear in a different color. This is part of the
design specifications, and is not a malfunction.
If the time is not displayed in white, try lowering
0
the parameters such as the frame size and
frame rate of the encoder corresponding to the
video displayed on the Built-in Viewer to reduce
the load on the computer.
For details on the encoder's parameter settings,
refer to the following.
(A P45 [[Encoding] Page] )
Format
Selects a time display format. YYYY, MM and DD
denote the year, month and days. HH, MM and SS
are hours, minutes and seconds. mm is 1/100
seconds.
[Set values: YYYY/MM/DD HH:MM:SS.mm,
YYYY/MM/DD HH:MM:SS, DD/MM/YYYY
HH:MM:SS, MM/DD/YYYY HH:MM:SS, MM/DD
HH:MM:SS, HH:MM:SS, HH:MM]
Advertisement
Table of Contents
