Table of Contents
Advertisement
Step 2: Turn On the Rider 60
Turn On/Off
Press and hold
Step 3: Initial Setup
When turning the Rider 60 on for the first time, the setup wizard appears on screen. Follow
the instructions to complete setup.
1. Select the display language.
2. Select the unit of measurement.
3. Enter your "User Profile".
4. Press p/q key to read and accept the Safety Agreement.
5. Select one of the available regional maps from the list.
IMPORTANT:
On the Map menu, you can only select one free regional map (i.e. UK). Once
the map activated, you are no longer to change it to another regional map.
NOTE: If you travel to an area that you do not have maps on your device, you can purchase
additional maps for your compatible device. Maps can be be purchased directly on the
Bryton Eshop http://www.brytonsport.com/eshop.
Step 4: Acquiring Satellite Signals
Once the Rider 60 is turned on, it will automatically search for satellite signals. When GPS is
fixed, the GPS status will display "Good". Before you start recording, please make sure you
have acquired the GPS signal.
NOTE:
•
Please ensure your device has a clear view of the sky for uninterrupted satellite signal.
•
For more detailed information, refer to
Step 5: Using Your Rider 60 While Riding
During exercise or training, the Rider 60 allows you to measure and record your activities
and displays your current performance.
•
Recording: in main page, tap
•
Pause/Stop recording: in meter view, press the
again to stop.
8 Rider 60 User's Manual
to turn the device on or off.
Meter & Map and press the
GPS Status section on page 36.
BACK/ /
u
button to start recording.
button to pause, press it
Hide quick links:
Advertisement
Table of Contents
