Bluetooth - Bryton Rider 60 User Manual

Bluetooth

Rider 60 allows you to connect with two Bluetooth devices at the same time. Before getting
the voice guidance or uploading your rides via Bluetooth, please follow these instructions:
IMPORTANT:
1. Enabling the voice guidance via Bluetooth headset
a. Enable the headset in pairing mode
Press and hold the headsets center "Call" or "Power" button for several seconds. Most
headsets have an indicator light that will remain steadily lit or flash rapidly to show the
device is ready for pairing. Release the button when this occurs. The headset is now in
pairing mode.
b. Pairing Rider 60 with your headset
i. On your Rider 60,tap the
the Bluetooth function. Please wait for a few minutes to allow the Rider 60 to search
for your headset.
ii. Once your headset appears on the list, select it and wait to allow the Rider 60 to pair
with your headset.
2. Uploading your rides via Bluetooth-enabled mobile phone
Before uploading your rides, please register and create a free Bryton account at
Brytonsport.com then enter your Bryton Account on Rider 60.
For the first time user, tap the
Bryton Account. Your Bryton Account is the e-mail address that you used to register when
becoming a member of Brytonsport.com.
IMPORTANT:
To ensure you upload rides to the right place, be sure that you have entered the correct
Bryton Account on the Rider 60. Please use
40 Rider 60 User's Manual
Always connect your Bluetooth device from Rider 60.
icon > Bluetooth > Bluetooth. Then tap On to enable
icon > User Profile > Bryton Account to register your
icon to switch the keyboard type.